Application Of Electrodes For Incontinence, Programmes 1 Through 5, 7 Through - schwa-medico UROstim 2 Instructions For Use Manual

12
schwa-medico Instructions for use - UROstim 2
Application of electrodes for incontinence, programmes 1 through 5,
7 through 8
Now place the electrodes. The self-adhesive electrodes are stuck to the skin at the
application points. The current that flows out of a channel consists of the positive
pole, the anode, and the negative pole, the cathode. The red cable connector that
connects the TENS unit to the electrode represents the anode. The blue cable
connector represents the cathode. It should be noted that with biphasic pulses, the
poles are constantly changing.
For both monophasic and biphasic programmes, it is recommended to
Attention:
place the anode at the point where the pain is greatest.
1. Attached above the pubic bone and the gluteal cleft
Select contact points so that muscle twitches are felt at some intensity.
Anode (red) Cathode (blue)
Anode (red) Cathode (blue)
2. Dam
Place the anode (red) above the pubic bone (see picture above). Cathode (blue)
as pictured below.
Cathode (blue)
Cathode (blue)