(not less than 10°C or more than 40°C or a relative humidity of more than 90%). • Do not use the SchnarchSTOP if it is not working properly or if it has been damaged in any way.
CAUTION! If using a both a SchnarchSTOP device and another high frequency medical device concur- rently, burning under the electrodes may occur. Operation in the vicinity (e. g. 1 meter) of a short- wave or microwave device may cause fluctuati- ons in the output values of the device.
Explanation of symbols Read the operating instructions carefully before use! Type BF application This product is in accordance with the directive 93/42/EEC for medical products of June 14, 0197 1993. Item respectively order number of the manufacturer Year of construction of the device Output power of the device Power supply of the device Technical data...
Operation Before using the SchnarchSTOP, the battery needs to be connected (see paragraph “battery ca- re”). Afterwards, the electrodes must be connec- ted to the device and placed appropriately. Therefore, connect the electrodes to the cables and then, insert the double plug securely into the SchnarchSTOP device outlet (4).
Operation errors The SchnarchSTOP steadily controls settings and connection of the electrodes. When an ope- ration error is detected, the pulse LED and the operation mode LED will flash alternately. For all operation errors applies: Remove the er- ror by turning the intensity knob back in direc- tion to 0.
direction to 0 until the pulse LED goes off (do not switch off the device). 4. Changing the operation mode during stimulation When actuating the operation mode selector switch during stimulation, an operation error as described under point 1 will be shown. However, no pulses will be produced.
SchnarchSTOP provided that resetting, modifications, and re- pairs are carried out by persons authorized by him, and that the SchnarchSTOP is used in ac- cordance with the operating instructions. Warranty During the warranty period of one year from the...
Need help?
Do you have a question about the SchnarchSTOP and is the answer not in the manual?
Questions and answers