Description - golmar G2+ 4WH User Manual

ART 4WH/G2+ MONITOR

DESCRIPTION

A. Speaker.
B. Function buttons, access and selection of menu
functions.
The function of each button is shown on the monitor
screen with an icon located just above each button
(see pp. 6 to 29).
Press to access 'Doctor mode' function (standby monitor):
- With the special code '0441' (Doctor mode) already
entered (see pp. 30 to
to activate/ deactivate the function.
- The push button led
icon will be displayed if the function 'Doctor mode' is
activated and it will turn off if the function is deactivated.
Press to acces the recordings menu (standby monitor):
- The push button led
that a photo/video is pending viewing. Pressing will
access the recordings menu.
C. Monitor status LED
Yellow ON: Standby without notification.
A
B
C
K
I
J
K
32), press the button for 5 sec.
will blink in white color and the
will blink in white color indicating
:
SA
GND
HZ
HZ
BUS
BUS
128
codes
SA
DIP 1 to 7
Monitor
GND
address
HZ
DIP 8
HZ
EOL
resistor
BUS
OFF = 0
ON = 1
BUS
Red ON: "Do not disturb" Mode a tivated.
Red blinking: System is busy.
D. 4.3" TFT colour screen.
E. Micro SD card slot (not included).
Type: MicroSD Class 10 from 4
F. Microphone.
G. Communication with hearing aids (Art 4WH/G2+).
Set the hearing aid switch to the T position.
H. Raised dots for the visually impaired people.
In call /communication
Above this raised dot is the 'Start/ nd communication'
button.
Above these raised dots is the 'Door opening' button.
I. Configuration switches.
J. Installation terminals.
K. Wall mounting connector fixing (x4).
D
F
G
H
K
K
c
GB to 128
:
E
4
E
GB .