Table of Contents
Advertisement
8.
With help of another person, lift the Cabinet on to the Plinth, following correct Manual Handling techniques.
Ensure that the Plinth fixing holes are aligned and temporally secure the Plinth to the Cabinet with two M8 x
16 countersunk screws (not supplied) before moving to next step.
9.
Open the Cabinet door and mark out the 4 fixing holes located inside the Cabinet on the wall referring to the
template found in Section 2.3 Dimensions if required.
V1.0 04/02/20
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
TD0192
Page 10 of 13
Advertisement
Table of Contents
