Table of Contents
Advertisement
10. Remove the securing screws between the Plinth and the Cabinet and safely take the Cabinet off the Plinth.
NOTE:
Make sure that you use a spirit level to check that you holes are straight and level.
11. Drill the marked fixing points. Ensure you are using correct PPE including googles and ear protection.
12. Next, insert the correct fixings appropriate to the wall type that you are mounting the Cabinet onto.
V1.0 04/02/20
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
TD0192
Page 11 of 13
Advertisement
Table of Contents
