Assa Abloy TD0192 Installation Manual page 11

13. With the help of another person, safely lift the TrakaMEC Cabinet Cabinet onto the Plinth and secure the
Cabinet to the Plinth as shown in step 8, but this time use all four M8 x 16 countersunk screws (not supplied).
14. Secure the Cabinet to the wall using the 4 drilled fixing points.
15. You are ready to use your Cabinet, your Code Handle is pre-installed with an admin code, and you should
have two code cards as well as instructions on how to use the Code Handle. For further information please
visit www.trakamec.com
V1.0 04/02/20
This Document is uncontrolled when printed unless over stamped "CONTROLLED DOCUMENT"
TD0192 Page 12 of 13