System Introduction - GE B20 User Manual

System introduction

Safety precautions
Warnings
• All system devices must be connected to the same power supply
circuit
• EXCESSIVE LEAKAGE CURRENT - Do not use a multiple socket
outlet or extension cord.
• INTERFACING OTHER EQUIPMENT - Devices may only be
interconnected with each other or to parts of the system when it
has been determined by qualified biomedical personnel that
there is no danger to the patient, the operator, or the
environment as a result. In those instances where there is any
element of doubt concerning the safety of the connected
devices, the user must contact the manufacturers concerned (or
other informed experts) for proper use. In all cases, safe and
proper operation should be verified with the applicable
manufacturer's instructions for use, and system standards IEC
60601-1 must be complied with.
• The medical electrical equipment or medical electrical system
may be interfered with by other equipment, even if that other
equipment complies with CISPR EMISSION requirements.
• BEFORE INSTALLATION — Compatibility is critical to safe and
effective use of this device. Please contact your local sales or
service representative prior to installation to verify equipment
compatibility.
System components
NOTE: Your system may not include all these components. Consult
your local representative for the available components.
3
1. Monitor frame with Software: VSP-C
2. E-modules: Parameter acquisition modules
3. Extension rack
9
2
1