Table of Contents
Advertisement
contact with line voltage by inserting metal objects, such as the
pins of leadwires, into the sockets of the power cord by mistake.
•
If liquid has accidentally entered the system or its parts,
disconnect the power cord from the power supply and have the
equipment serviced by authorized service personnel.
•
If a service message appears, discontinue use as soon as
possible and have the device repaired.
•
PROTECTED LEADWIRES - Only use protected leadwires and
patient cables with this monitor
•
When applying devices intracardially, never contact electrically
conductive parts connected to the heart (pressure transducers,
metal tube connections and stopcocks, guide wires, etc.).
•
Do not use the monitor in high electromagnetic fields (e.g., MRI).
•
Do not tilt the monitor to avoid liquid entering.
•
Do not touch the electrical connector located within the
extension rack housing.
•
Never store the monitor with the batteries inside. Storing the
monitor with the batteries inside may result in damage to the
monitor.
•
NETWORK INTEGRITY — The monitor resides on the CARESCAPE,
S/5 and/or HL7 network. It is possible that inadvertent or
malicious network activity could adversely affect patient
monitoring. The integrity of the network is the responsibility of
the hospital.
•
Don't modify this device without authorization of manufacturer.
If this device is modified, appropriate inspection and testing
must be conducted to ensure continued safe use of equipment.
8
Caution safety messages
The following caution safety messages apply to this monitoring
system.
•
U.S. Federal law restricts this device to sale by or on the order of
a physician.
•
SUPERVISED USE - This equipment is intended for use under the
direct supervision of a licensed health care practitioner.
•
Dispose of equipment in compliance with instructions and
regulations.
•
Reset the monitor if loss of monitoring data occurs.
•
Leave space for circulation of air to prevent the monitor from
overheating.
•
Before connecting power, check voltage and frequency ratings
of equipment.
•
System time changes will result in time differences between
stored and realtime data.
Notice safety message
The following notice safety messages apply to this monitoring
system.
•
NOTICE - The warranty does not cover damages resulting from
the use of accessories and consumables from other
manufacturers.
•
If the device has been transported or stored outside operating
temperature allow the device stabilize back to operating
temperature range before applying power.
•
The equipment is suitable for use in the presence of
electrosurgery. Please notice the possible limitations in the
parameter sections and in the "Techncial specification" section.
Hide quick links:
Advertisement
Table of Contents
