Installing The Phototube (Only Trinocular Model); Connecting The Power Supply; Os-Sz3 / Os-Sz4 - Optika OPTIStar OS-SZ1 Instruction Manual

7.1.5 Installing the phototube (only OS-SZ2)
1. Remove the dust cover by unlocking the fixing screw ①.
(Fig. 5)
2. Insert the ring of the photo port ② making sure to leave the
fixing screw of the photo adapter ③ facing right.
3. Lock the fixing screws ①.
7.1.6

Connecting the power supply

Connect the power supply plug to the socket on the back of the
microscope base. (Fig. 6)
7.2

OS-SZ3 / OS-SZ4

1. Screw the pillar on the base. (Fig. 7)
2. Tighten the screw to lock the pillar. (Fig. 8)
②
Page 7
③
①
F ig. 5 F ig. 5
F ig. 6 F ig. 6
F F ig. 7 ig. 7
F ig. 8 F ig. 8