Assembling; Os-Sz1 / Os-Sz2; Installing Focus System; Connecting Incident Light Cable - Optika OPTIStar OS-SZ1 Instruction Manual

7.

Assembling

7.1

OS-SZ1 / OS-SZ2

7.1.1

Installing focus system

Place the focusing system on the pillar and, once the desired
height is reached, tighten the locking knob ① located on the back
of the focusing system. (Fig. 1)
7.1.2

Connecting incident light cable

Insert the cable plug into the socket at the top of the pillar ②.
(Fig. 2)
7.1.3

Installing the head

Install the head and screw the fixing knob ③. (Fig. 3)
7.1.4

Installing the eyepieces

Remove the dust caps from the eyepiece sleeves and insert the
eyepieces. (Fig. 4)
Page 6
②
③
①
F ig. 1 F ig. 1
F ig. 2 F ig. 2
F F ig. 3 ig. 3
F ig. 4 F ig. 4