Table of Contents
Advertisement
Note
Motion detection area and sensitivity should be set, properly, in consideration of the actual
motion that happened on the site.
COPY SETTING
To apply the settings to all cameras connected to the NVR, click on the Copy Settings button:
1.
Select the channel to get the setting from
2.
Select the property(s) to copy.
3.
Select the target channel(s) to apply the setting.
4.
Click [OK] to apply the setting to all the other selected channel(s).
EVENT MONITOR
Show the event number for each camera. It shows check count number, motion detection and sensor
detection.
Advertisement
Table of Contents
Need help?
Do you have a question about the VMAX ip PLUS DW-VP9P and is the answer not in the manual?