Table of Contents
Advertisement
TIME SYNC MODE
There are three types of time sync modes:
•
Server Mode: The operating NVR is set as a Time Sync Server, which can synchronize the
time other NVR(s) are connected over the same network.
•
Client Mode: Input the IP address of a designated NVR or Remote Software P/C (CMS) as a
Time Sync Server in "SYNC SERVER". The NVR's time clock will be synchronized with the
server by interval time set in the "TIME SYNC CYCLE".
•
NTP Mode: "pool.ntp.org" is the recommended NTP Server. To activate, set the TIME ZONE of
your local area and then click [SYNC NOW].
•
GPS Mode: Connect USB type GPS device and click [SYNC NOW]
HDD Format
2.3
Digital Watchdog's NVRs are shipped with pre-installed HDDs that are formatted and ready to be
used. There is no need to format the HDDs out of the box.
Advertisement
Table of Contents
Need help?
Do you have a question about the VMAX ip PLUS DW-VP9P and is the answer not in the manual?
Questions and answers