Using The Assignable Buttons; Applying Modulation To Notes (Assignable 1; Applying Portamento To Notes (Assignable 1/2; Changing The Rotary Effect Speed (Assignable 2 - Casio Privia MA1003-A User Manual

Using the Assignable Buttons

There are two assignable buttons named

(ASSIGNABLE 1) and
(ASSIGNABLE 1) button is designed so it is on while
pressed and off while released. The
(ASSIGNABLE 2) button toggles on (lamp lit) and off
(lamp unlit) each time it is pressed.
The main use of the assignable buttons is to perform
real-time operations, mainly for effects. You can
configure settings for the assignable button with the
common menu (page E-18).
NOTE
• For information about how to configure settings, see
"To change common parameter settings" (page
E-19).
• The "Common Parameter Information" and "Zone
Parameter Information" items in the explanations in
this section show where you need to go for
information about the parameters that come under
an assignable function.
Applying Modulation to Notes
(ASSIGNABLE 1)
Fixed-depth modulation is applied to notes while the
 (ASSIGNABLE 1) button is pressed or released.
Common Parameter Information:
4-A Assignable Button 1 Type (Asgn1) (page E-22)
4-B, 4-C Settings when Asgn1 = Modulation (Mod)
(page E-22)
E-24


(ASSIGNABLE 2). The

MASTER CONTROL
Applying Portamento to Notes
(ASSIGNABLE 1/2)
Applying portamento causes the pitch to slide between
two notes played in succession. It is an effect that is
used with strings and woodwind instruments. With
the  (ASSIGNABLE 1) button, portamento is applied
while the button is pressed. With the
(ASSIGNABLE 2) button, portamento is applied while
the button is on.
Common Parameter Information:
4-A Assignable Button 1 Type (Asgn1) (page E-22)
5-A Assignable Button 2 Type (Asgn2) (page E-22)
Zone Parameter Information:
4-C Portamento ON/OFF (Porta) (page E-31)
4-D Portamento Time (PTime) (page E-31)
Changing the Rotary Effect
Speed (ASSIGNABLE 2)
When the rotary effect is being selected by DSP (page
E-30), each press of the 
toggles the rotation speed between fast and slow.
Common Parameter Information:
5-A Assignable Button 2 Type (Asgn2) (page E-22)
Zone Parameter Information:
DSP Settings (page E-30)
CARD PLAYER

(ASSIGNABLE 2) button