Casio Privia MA1003-A User Manual page 24

Confirming Common Parameter Settings
■ 4-A Assignable Button 1 Type (Asgn1)
Specifies the function assigned to the
The following describes the functions that can be assigned by each setting.
Setting
Modulation (Mod)
Portamento (Por)
Control Change
Number 0 to 127
#
(CC 000 to 127)
*1 To apply modulation only to a particular zone, select "001" (CC
Also, specify a control change send MIDI channel that matches the MIDI channel of the zone where you want to
apply modulation. For more information, see "Settings when Asgn1/Asgn2 = Control Change Number 0 to 127"
(page E-23).
*2 Portamento can be turned on or off for each zone. For details, see "Editing Tones" (page E-31).
■ 5-A Assignable Button 2 Type (Asgn2)
Specifies the function assigned to the
The following describes the functions that can be assigned by each setting.
Settings
Rotary (Rot)
Portamento (Por)
DSP Bypass (Dbp)
Control Change
Number 0 to 127
#
(CC 000 to 127)
*1 Portamento can be turned on or off for each zone. For details, see "Editing Tones" (page E-31).
■ 4-B, 4-C Settings when Asgn1 = Modulation (Mod)
Parameter Name
Depth (Button OFF)
(OfDep)
Depth (Button ON)
(OnDep)
E-22
 (ASSIGNABLE 1) button.
This setting assigns modulation to the button.
(B) and  (C) buttons.
This setting assigns portamento the button. When this function is assigned, portamento is applied
while the  (ASSIGNABLE 1) button is depressed and not applied while the button is released.
This setting assigns a control change number to the button. The MIDI channel for sending a control
change or the value sent when the
using the  (B),  (C), and

(ASSIGNABLE 2) button.
This function, which switches rotation speed, can be assigned for the rotary effect used by the DSP
(see "DSP Type" on page E-30). The speed is "Fast" when the
(lamp lit) and "Slow" when it is off (lamp unlit).
This setting assigns portamento to the button. Portamento is applied when the
button is on, and not applied when it is off.
This setting assigns a function that turns off the DSP of a particular zone. The zone whose DSP is
being turned off is specified with the
This setting assigns a control change number to the button. The MIDI channel for sending a control
change or the value sent when the
 
(B), (C), and (D) buttons.
Location
4-B Specifies the modulation depth while the
button is not pressed.
4-C Specifies the modulation depth while the
button is pressed.
Assigned Functions
*1
The depth of the modulation is specified using the
 (ASSIGNABLE 1) button is pressed or released is specified
 (D) buttons.
#
1 = Modulation) as the Asgn1 instead of "Mod".
Assigned Functions
*1
 (B) button.

(ASSIGNABLE 2) button is on or off is specified using the
Description
 (ASSIGNABLE 2) button is on
 (ASSIGNABLE 2)
Settings (* indicates default)
*
0 to 127
*
0 to 127

*2
