Casio Privia MA1003-A User Manual page 37

4.
While holding down the
press one of the number buttons (
through  (8)) to specify the number of the
area (1 to 8) where you want to save the
registration data.
ck cl cm cn co
• Pressing a number button immediately executes the
registration data save operation.
• The following shows how the display would appear
if you select Bank 1, Area 3.
To recall a setup saved as registration
data
1.

Press the (REGISTRATION) button so the
lamp below it is lit. This is the
REGISTRATION mode.
2.
 (w, q) buttons to scroll through
Use the
the banks (1 to 8) until the one where the
registration data you want to recall is
displayed.
3.
Press one of the number buttons (

through (8)) to specify the number of the
area (1 to 8) where the registration data you
want to recall is located.
• Pressing a number button immediately recalls and
applies the setup in accordance with the registration
data being recalled.
• The following shows how the display would appear
if you select Bank 3, Area 7.
 (STORE) button,
 (1)
cp cq cr dm
Area number
Bank number

(1)
To rename a registration memory bank
1.
While holding down the

button, press the
button.
2.
 (w, q) buttons to scroll through
Use the
the banks (1 to 8) until the one you want to
rename is displayed.
• This displays a screen for editing the name.
3.
Edit the name.
• The initial default name of all the banks is
"REGIBANKNAME".

• Use the (u) and
cursor left and right, and the
scroll through characters at the current cursor
position. The following shows the characters that can
be used in a name.
0 1 2 3 4
A B C D E
K L M N O
U V W X Y
( ) - ^ {
• You can specify up to 12 characters for a bank name.
4.
After the name is the way you want, press the

(ENTER) button.
5.
In response to the confirmation message
("Sure?") that appears, press the
button to apply the change or the
button to return to the screen in step 3 of this
procedure without changing anything.
NOTE
• To display a bank name, hold down the
(REGISTRATION) button on the registration mode
screen.
Using Registration Memory

(FUNCTION)
(REGISTRATION)

(i) buttons to move the
 (w, q) buttons to
5 6 7 8 9
F G H I J
P Q R S T
Z S & _ '
} @ ~ `

(YES)

(NO)

E-35