Reference; Troubleshooting - Casio Privia MA1003-A User Manual

Reference

Troubleshooting

Problem
Nothing comes out of the
connected headphones or
amplifier speakers when I play
something.
The pitch of the Digital Piano
is off.
Tones and/or effects sound
strange. Turning power off
and then back on again does
not eliminate the problem.
Example: Note intensity does
not change even though I alter
key pressure.
I cannot hear any chorus/
reverb effect when I turn on
chorus/reverb.
I cannot play back a music file
from an SD card.
I cannot transfer data after
connecting the Digital Piano
to a computer.
I cannot store data to a
memory card or load data
from a memory card.
Playback stops part way
through while transferring
song data from my computer.
E-52
Cause
The  (VOLUME) knob is set to
"MIN".
The UPPER 1 zone setting is INT
OFF.
The Digital Piano's key setting is
something other than 0.
Digital Piano tuning is incorrect.
The Coarse Tuning and/or Fine
Tuning setting is something other
than 0.
A non-standard temperament setting
is being used.
Octave shift is enabled.
The "Backup" feature is turned on.
The chorus send/reverb send setting
is 0.
The file you are trying to play is not a
format supported by this Digital
Piano.
—
—
Digital noise from the USB cable or
power cord caused data
communication between your
computer and Digital Piano to be
interrupted.
Action
Rotate the  (VOLUME) knob more
towards "MAX".
Change the UPPER 1 zone setting to INT
ON. If you are using Layer and/or Split,
change the setting of the zone you are
using to INT ON.
Change the key setting to 0, or turn Digital
Piano power off and then back on again.
Adjust Digital Piano tuning, or turn Digital
Piano power off and then back on again.
Change the setting(s) to 0 or turn Digital
Piano power off and then back on.
Change the temperament setting to
"00:Equal", which is the standard modern
tuning.
Change the octave shift setting to 0.
Turn off "Backup". Next, turn power off
and then back on again.
Change the chorus send/reverb send
setting to a greater value.
This Digital Piano supports playback of
Format0 or Format1 SMF files, or CM2
(CASIO proprietary format) files only.
Playback of WAV and MP3 files, or other
format MIDI files is not supported.
• Check to make sure that the USB cable
is connected to the Digital Piano and
computer, and that the correct device is
selected with your computer's music
software.
• Turn off the Digital Piano and then exit
the music software on your computer.
Next, turn the Digital Piano back on and
then restart the music software on your
computer.
See "Error Messages" on page E-48.
Stop song playback, disconnect the USB
cable from the Digital Piano, and then
reconnect it. Next, try playing back the
song again.
If this does not solve the problem, quit the
MIDI software you are using, disconnect
the USB cable from the Digital Piano, and
then reconnect it. Next, restart the MIDI
software and then try playing back the
song again.
See Page
 E-11
 E-27
 E-20
 E-39
 E-31
 E-39
 E-30
 E-40
 E-32
 E-41
 E-49
—
 E-49