General Information; Disposing Of The Product - Grundfos Control CUE Safety Instructions And Other Important Information

English (GB) Safety instructions
■
Original safety instructions
These safety instructions give a quick overview of the
safety precautions to be taken in connection with any
work on this product. Observe these safety
instructions during handling, installation, operation,
maintenance, service and repair of this product.
These safety instructions are a supplementary
document, and all safety instructions will appear
again in the relevant sections of the installation and
operating instructions. Keep these safety instructions
at the installation site for future reference.

General information

Read this document before you install the
product. Installation and operation must
comply with local regulations and accepted
codes of good practice.
Installation
Commissioning the product
WARNING
Electric shock
Death or serious personal injury
‐
The electrical installation must be car-
ried out by an authorised person in ac-
cordance with local regulations and the
relevant wiring diagram.
‐
Switch off the power supply before you
start any work on the product. Make
sure that the power supply cannot be
switched on accidentally.

Disposing of the product

This product or parts of it must be disposed of in an
environmentally sound way.
1. Use the public or private waste collection service.
2. If this is not possible, contact the nearest
Grundfos company or service workshop.
4
The crossed-out wheelie bin
symbol on a product means
that it must be disposed of
separately from household
waste. When a product
marked with this symbol rea-
ches its end of life, take it to a
collection point designated by
the local waste disposal au-
thorities. The separate collec-
tion and recycling of such
products will help protect the
environment and human
health.
See also end-of-life information at
www.grundfos.com/product-recycling.