Note: To maintain proper system cooling, if only one 4U PCIe riser assembly is installed, the 4U
PCIe riser assembly filler must be installed to operate the server.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.
Remove the PCIe expansion tray
Use this procedure to remove the PCIe expansion tray.
Before removing the PCIe expansion tray:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page
3. If the server is installed in a rack, remove the server from the rack.
4. Remove the top cover (see
To remove the PCIe expansion tray, complete the following steps:
Watch the procedure
A video of this procedure is available at YouTube:
PLYV5R7hVcs-Ak9fT8QAx8fLbEivizjRtp
ThinkSystem SR860 Setup Guide
92
56).
132).
"Remove the top cover" on page
.
"Safety" on page iii
89).
https://www.youtube.com/watch?v=pIb0bIyfkDY&=
and
"Installation