Remove The Chassis Air Baffle - Lenovo ThinkSystem SR860 Setup Manual

Figure 55. PCIe expansion tray removal
Step 1. Remove all the 4U PCIe riser assemblies and the 4U PCIe riser assembly fillers that are installed in
the PCIe expansion tray (see
Step 2. Grasp the handle of the PCIe expansion tray; then, rotate it upward to the vertical position.
Step 3. Grasp the handle with one of your hands, with the other hand grasping the 4U PCIe expansion tray
lift point; then, lift the tray out of the server.
If you are instructed to return the component or optional device, follow all packaging instructions, and use
any packaging materials for shipping that are supplied to you.

Remove the chassis air baffle

Use this procedure to remove the chassis air baffle.
Before removing the chassis air baffle:
1. Read the safety information and installation guidelines (see
Guidelines" on page
2. Turn off the server and peripheral devices and disconnect the power cords and all external cables (see
"Power off the server" on page
3. If the server is installed in a rack, remove the server from the rack.
4. Remove the top cover (see
"Remove a 4U PCIe riser assembly" on page
56).
132).
"Remove the top cover" on page
90).
"Safety" on page iii and
89).
.
Chapter 3 Server hardware setup
"Installation
93