Use the two screws I to secure the top left
and right edges of the back panel C to the
brackets 5 of side panels A and B .
• At location 6 , slip the clip G onto to the screw I
before installing the screw.
Next, secure the bottom of the back panel C
with the six screws F .
Adjust the height adjustment screw 7 to
provide support so crosspiece D does not
bow downwards when the pedals are
• Pressing the pedals without adjusting height
adjustment screw 7 can result in damage to
crosspiece D . Always make sure you adjust height
adjustment screw 7 before operating the pedals.
Place the piano onto the stand.
• At this time the screws on the bottom of the piano 8
should hook into the cutouts in the stand brackets 9 .
Use the two butterfly bolts H to secure the
piano to the stand.
• The butterfly bolts keep the piano from slipping off
the stand. Never use the piano without the butterfly
Assembling the Stand
Back of piano
Stand side panel