Connecting Binary Signals - ABB RELION 615 Series Installation Manual

Connecting
5.5

Connecting binary signals

• Connect the wires for the binary signals to the correct device according to
the connection diagram. Each terminal for binary input and output signal is
dimensioned for one 0.5...2.5 mm
Figure 58: Example of BIO0005 card variant (8 BI + 4 BO)
66
In addition to specific BIO cards, BI/O signals are available with
some AIM and PSM cards. See the application manual for standard-
configuration specific binary signal options.
2
wire or for two 0.5...1.0 mm
1MRS756375 T
2
wires.
615 series
Installation Manual