Replacing A Strömberg Sp_J3/J6 Series Relay In 19" Rack By A 615 Series Ied; Replacing A Strömberg Sp_J6 Series Relay By A 615 Series Ied - ABB RELION 615 Series Installation Manual

1MRS756375 T
4.3.12 Replacing a Strömberg SP_J3/J6 series relay in 19" rack by
a 615 series IED
1.
2.
3.
615 series
Installation Manual
Mount the installation plate to the existing panel cut-out with M6 screws and
nuts.
Use the existing screw holes.
B
A 446 mm
B 196 mm
Figure 31: Screw hole and existing panel cut-out dimensions for replacing a
SP_J3/J6 series relay
1 Installation plate
2 Torx head screw M6x20
Figure 32: Installation plates for replacing SP_J3/J6 relay in 19" rack
Tighten the screws.
Mount the new IED with the mounting frame to the installation plate.
For ordering numbers, see the ordering number table.
A
C
C
D
1
3
2
3
460 mm
114.5 mm
Hexagon nut M6
Mounting
D
47