Creality Ender-6 User Manual page 27

This machine can print at a fast speed, but it is recommended to print at normal speed!Notes: the temperature of the nozzle is set according to the
printing speed. Take PLA as an example:
本机器支持高速打印， 但建议以正常速度打印！ 注意： 不同速率时， 喷嘴打印温度需相应调整设置， 创想配送PLA推荐设置参数：
print speed
打印速率
Print temperature
打印温度
The printing temperature is different owing to the variety of PLA filaments. Please refer to the actual situation.
打印温度会存在些许差异， 请根据实际打印情况适当调整。
200
0.00
210
60
100%
Around 200℃
200℃左右
200
0.00
210
60
200% 300%
Around 210℃ Around 220℃
210℃左右 220℃左右