Leica mojoRTK How-To Manual page 5

The 'Minimum Motor Speed' adjusts the minimum
speed at which the motor will be moved. If the
motor is trying to move the wheel, but the wheel
isn't turning increase this value. If the motor is
moving too fast and overshooting past the
desired turning position, decrease this value.
The 'Override Sensitivity' adjusts how sensitive
the QuickSteer is to the operator overriding the
auto steer controls.
The 'Maximum Motor Speed' adjusts the
maximum speed at which the motor will move.
This should be decreased if the motor
consistently moves too fast and overshoots the
desired tuning position.
When setting one of the settings in the Steer Kit Wizard, use the main
dial to adjust the value. When you are satisfied with the setting value,
press OK to save the value and continue to the next setting. Press Escape
to undo any changes and return to the previous screen.
Steer Kit Information Menu
The Steer Kit Info menu is available to Leica approved
Value Added Resellers in the Dealer Menu. This menu
provides a quick method of viewing QuickSteer
details including firmware version and current
encoder position.
Glossary
Base The source of the correction signals for the RTK solution.
May also referred to as: base station, reference station
and network reference station.
CAN Controller Area Network, the communication bus used
between the mojoRTK console and the steering kit.
Console The mobile receiver installed in the vehicle.
QuickSteer Steering motor from Leica Geosystems.
For more information
www.mojoRTK.com
Page 5/5 Document #1034 rev1.3