Intel H110 Technical Manual page 39

PS2 KB/MS Connect
Use this item to select PS2 connect primary device.
The optional settings: [Keyboard First]; [Mouse First].
►
PC Health Status
Press [Enter] to view current hardware health status, make further settings in
'SmartFAN Configuration' and set value in 'Shutdown Temperature'.
► SmartFAN Configuration
Press [Enter] to make settings for SmartFan Configuration:
SmartFAN Configuration
CPUFAN / SYSFAN1 Smart Mode
The optional settings: [Disabled]; [Enabled].
When set as [Enabled], the following sub-items shall appear:
CPUFAN / SYSFAN1 Full-Speed Temperature
Use this item to set CPUFAN/SYSFAN full speed temperature. Fan will run at full
speed when above this pre-set temperature.
CPUFAN / SYSFAN1 Full-Speed Duty
Use this item to set CPUFAN/SYSFAN full-speed duty. Fan will run at full speed
when above this pre-set duty.
CPUFAN / SYSFAN1 Idle-Speed Temperature
Use this item to set CPUFAN /SYSFAN idle speed temperature. Fan will run at idle
speed when below this pre-set temperature.
CPUFAN / SYSFAN1 Idle-Speed Duty
Use this item to set CPUFAN/SYSFAN idle speed duty. Fan will run at idle speed
when below this pre-set duty.
Shutdown Temperature
Use this item to select system shutdown temperature.
The optional settings: [Disabled]; [70
o o
[85 C/185 F]; [90
 Serial Port Console Redirection
Press [Enter] to make settings for the following sub-items:
o o
C/194 F].
o o
C/158 F]; [75
34
o o o
C/167 F]; [80 C/176
o
F];