Air Filter Replacement; Checking The Rotor And Wheel Bearings - P.Lindberg 9062071 Manual

The pre-filter is cleaned with soap and water, pressed free of liquid and left to dry.
When dry, wet it with a little thin oil.
The paper filter is replaced.
Put the filter back in the air filter housing, put on the cover and screw it on with the
wing nut.

Air filter replacement

When the pre-filter can no longer be cleaned due to wear or damage, it must be
replaced. Use the above procedure to disassemble the air filter and insert the new
foam element.

Checking the rotor and wheel bearings

Inspect the bearings in both rotor and wheel bearings regularly. Be sure to keep them
clean, but never use a high-pressure cleaner on the bearings. Water can penetrate the
bearings, which destroys them and can cause machine damage.
When inspecting the bearings, their free movement must be checked. They must roll
easily and without noise. The bearings are replaced as needed.
17
MAN 9062071 EN V4
P. Lindberg A/S Sdr. Ringvej 1 www.p-lindberg.dk
Tel.: +45 70212626 6600 Vejen, Denmark E-mail: salg@p-lindberg.dk