Trapped Wood - P.Lindberg 9062071 Manual

Trapped wood

If the wood chipper has trapped wood, you must first stop the engine and remove the
sparkplug terminal before remedying the problem.
Remove the protective guard on the
rotor shaft.
Loosen the four screws and tilt the
hopper backwards to empty the
machine on the outlet side.
The rotor can be turned backwards
using the included wrench to loosen the
stuck wood.
Use a wooden pin to remove the pieces
that have become stuck to the rotor.
Never use your hands since the blades
and counter blade are very sharp.
P. Lindberg A/S
Tel.: +45 70212626
13
Sdr. Ringvej 1
6600 Vejen, Denmark
MAN 9062071 EN V4
www.p-lindberg.dk
E-mail: salg@p-lindberg.dk