Package Components; Other Tool Products Required For Development - Renesas M302N1 User Manual

Chapter 2. Preparation

2.1 Package Components

This product consists of the following items. When unpacking, check to see if your product package
contains all of these items.
Table 2.1 Package components
M302N2T-PRB pod probe for M302N1 and M302N2 Group MCUs
Screws (screws for fixing pod probe: pre-installed to the pod probe)
FLX-80QSB converter board for 80-pin 0.65-mm-pitch QFP (80P6S-A)
M302N2T-PRB User's Manual (this manual)
M302N2T-PRB User's Manual (Japanese)
M302N2T-PRB Repair Request Sheet (English/Japanese)
Please keep the M302N2T-PRB's packing box and cushion material in your place for reuse at a later
time when sending your product for repair or other purposes. Always use these packing box and
cushion material when transporting the M302N2T-PRB.
If any of these items are missing or found faulty, please contact your local distributor. Also, if there
is any question or doubt about the packaged product, contact your local distributor.

2.2 Other Tool Products Required for Development

To bring forward programs development on the M302N1 and M302N2 Group MCUs, the products
listed below are necessary in addition to the package components listed above. Get them separately.
Table 2.2 Other tool products
Emulator main unit
Emulation pod main unit
Emulator debugger
Converter board
To purchase these products, contact your nearest distributer.
Item
PC4701
M30200T-RPD-E
M3T-PD30 Ver.4.00 or later
M302N1T-56FPB converter board for M302N1 Group MCUs
(Necessary for evaluating M302N1 Group MCUs)
( 14 / 38 )
Quantity
1
2
1
1
1
1