Table of Contents
Advertisement
•
When units are received, notify the nearest Johnson Controls office in ample time for a
Johnson Controls representative to supervise rigging the unit to its storage or operating
locations.
•
Do not make final power supply connections to the single point power panel or any other
power connections without Johnson Controls supervision.
•
Do not charge the unit with refrigerant.
•
Do not attempt to start the system.
•
Do not run hot water (>110°F or 43.3°C maximum) or steam through the evaporator at any
time.
Chiller data plate
A unit data plate is mounted on the outside of the right side door of the Variable Speed Drive panel
assembly of each unit. It provides the unit model number, design working pressure, refrigerant
charge, serial numbers, and all chiller power characteristics.
Additional information is provided on the evaporator, compressor, and motor data plates. This
information must be included when contacting the factory on any problem.
Figure 8: Chiller data plate
12
YVAM Air-Cooled Centrifugal Liquid Chiller
Advertisement
Table of Contents
