E10A-Usb Interface - Renesas M3A-HS85 User Manual

2

2.11 E10A-USB Interface

The M3A-HS85 has the H-UDI connectors (J1 and J2) to connect with E10A-USB.
____________________ ________________
ASEBRKAK /ASEBRK
M3A-HS85 is connected to E10A-USB, SW4-1 should be set to " OFF " after FWE switch jumper (JP6) is set to " 1-2 " .
When it is connected to E10A-USB in the state that SW4-1 is set to " ON " , it cannot be normally debugged.
Figure 2.11.1 shows the block diagram of E10A-USB interface.
Rev.1.04 2008.7.10
REJ10J1564-0104
/FWE pin of SH7285 is connected to DIP switch for system setting (SW4-1). When the
Figure 2.11.1 Block Diagram of E10A-USB Interface
Functional Overview
2.11 E10A-USB Interface
2-15