Renesas M3A-HS85 User Manual page 56

3
SW4-1 SW4-2
(FWE) (MD1)
ON ON
ON ON
ON OFF
ON OFF
OFF ON
OFF ON
OFF OFF
OFF OFF
: Initial Setting
Note: * It is the programming mode of flash memory.
Table 3.2.8 lists the functions of LEDs mounted on M3A-HS85.
No. Color
LED1 Blue
LED2 Green
LED3 Green
LED4 Green
LED5 Green
LED6 Green
LED7 Green
Rev.1.04 2008.7.10
REJ10J1564-0104
Table 3.2.7 SH7285 Operating Mode Setting
SW4-3
Operating
(MD0)
Mode
ON Mode 0
OFF Mode 1
ON Mode 2
OFF Mode 3
ON Mode 4 *
OFF Mode 5 *
ON Mode 6 *
OFF Mode 7 *
Table 3.2.8 Functions of LEDs mounted on M3A-HS85
Power-on LED (LED1 lights when power is supplied)
Open to user (LED2 lights on when PE9 outputs "L")
Open to user (LED3 lights on when PE11 outputs "L")
Open to user (LED4 lights on when PE12 outputs "L")
Open to user (LED5 lights on when PE13 outputs "L")
Open to user (LED6 lights on when PE14 outputs "L")
Open to user (LED7 lights on when PE15 outputs "L")
SH7285 Operating Mode
Mode Name
MCU extension mode 0
(On-chip ROM disabled,CS0 space :16bit bus)
MCU extension mode 1
(On-chip ROM disabled,CS0 space:8bit bus)
MCU extension mode 2 (On-chip ROM enabled)
Single chip mode (On-chip ROM enabled)
Boot mode (On-chip ROM enabled)
User boot mode (On-chip ROM enabled)
User program mode (On-chip ROM enabled)
USB boot mode (On-chip ROM enabled)
Functions/Remarks
Operational Specifications
3.2.5 Switch and LED Functions
3-24