Related Manuals for QRS PMII
Summary of Contents for QRS PMII
- Page 1 QRS PMII to PNO3WB Upgrade Instructions Manual Revision: March 2022 PNO3 OS Versions 5.xx & Above PMII PNO3...
- Page 2 MIDI OUT: Key Adjust, Pedal Adjust and Delay Wired Network (LAN) Power ON and Test the PNO3WB Wireless Network Accessing and Naviga ng... [Connect to the QRS Wi‐Fi] QRS Finder App Ini al System Setup‐QRS System Customer Trial Ac va on & Preowned Music...
-
Page 3: Midi Controller
MIDI Controller MIDI IN ‐ This port may be connected to a MIDI Record strip. MIDI OUT ‐ This port connects to the MIDI slave device that the QRS processor is controlling. 9VDC Power Adapter SD Card‐DO NOT remove, you won’t need it. - Page 4 3 PWM Control, 20‐Pin ribbon to Rev 7 boards OR 37‐Pin new style Magne c adapter. PMII Connect the Power supply and PLx cables. Verify that the QRS power supply switch is OFF before connec ng this cable. NEVER connect the POWER SUPPLY and DC 9VDC cables to the same processor. Record System, if installed.
-
Page 5: Power Adapter
QRS PMII to PNO3WB Upgrade Instruc ons MIDI Controller PianoDisc The PianoDisc controller is not needed to play the piano from PNO3WB processor. The PianoDisc controller IS needed to calibrate the keys and pedal solenoid. IF the PianoDisc controller is removed, do not discard, it can be reconnected to calibrate the system. - Page 6 QRS PMII to PNO3WB Upgrade Instruc ons MIDI Se ngs‐MIDI Controller MIDI Se ngs [The piano won’t play un l 5 Pin MIDI Out op on is turned ON.] From Home, go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Op ons / General...
- Page 7 Touch the center of the screen to open the QRS Menu. You will see one of several possible screens. Look for the menu column on the le , not in the body of the screen. If only three white bars show at the top le of the QRS screen..the Menu column is closed. Tap three bars to open the Menu column.
- Page 8 QRS PMII to PNO3WB Upgrade Instruc ons QRS SYSTEM Ini al System Setup ‐ Playback Parameters [The path to menu items will always start at the Home page.] Do the correct keys play? System Setup / Performance Setup / Test Files.
- Page 9 QRS PMII to PNO3WB Upgrade Instruc ons QRS SYSTEMS Ini al System Setup (Con nued) Pedal Adjust‐Mechanical. Sustain Pedal Solenoid Adjustments for Old Style Trapwork. Adjust, if necessary. Loosen lock‐nut & turn the bolt to move the bolt‐head away from the straight lever. We don’t want any pressure on the straight lever while making the next few adjustments Check for this small wood block, with felt pad, as shown.
- Page 10 QRS PMII to PNO3WB Upgrade Instruc ons QRS SYSTEM Pedal Adjust [Not necessary if there isn’t a pedal solenoid a ached and/or Magic Pedal is ON] Go to: System Setup / Performance Setup / Pedal Adjust. Pedal Test On Time:500 [Adjusts the pedal solenoid ON/OFF interval during the Pedal Adjust procedure. Make the changes below before beginning the adjustment.
- Page 11 QRS PMII to PNO3WB Upgrade Instruc ons QRS PNOscan Record Setup, If Installed If you did NOT connected a ribbon cable to the PNOscan 10 port on the PNO processor then skip this page. PNOscan Key Adjust This procedure calibrates the PNOscan’s key sensors and saves the data to the PNO processor.
-
Page 12: Voice Prompts
Go to: System Setup / Performance Setup / Master Volume Curves only apply if the Play Sample is used. Tap the QRS Solo File Setup [Songs with red tles] Volume Curve Configura on – So Playback page Set the PLAYBACK QRS (SOLO) PIANO CURVE = 0 Tap NEXT to Volume Curve Configura on –... -
Page 13: Network Setup
Inet IP informa on which should display the number that you heard over the speakers. QRS Finder App Access the PNO3 menu with your smart device connected to your home Wi‐Fi instead of the QRS Wi‐Fi. Close the open programs on your device, especially the QRS page you’ve been using. - Page 14 Preowned QRS Music If you own any QRS CDs or Floppy discs, call 800‐247‐6557 and we will unlock those albums on your PNO3WB system. We will give you an email address to email pictures of the CD cases showing the QRS catalog numbers.
- Page 15 The ini al one‐year music trial period determines the QRS Player Parts Warranty period. Extended Parts Warranty QRS Player Parts are covered as long as the QRS PNO3 system is under a QRS Music Subscrip on Plan To determine the warranty period for your system: Go to: System Setup / Service / View Se ngs and scroll down the page to find the Ac ve DRM sec on.