Page 1
YOU MAY WANT TO ADD A MIXER OR ANOTHER SPEAKER If the original controller AND the QRS PNO3WB units are used, a mixer would be used to combine the audio outputs from the two controllers into one speaker. The second op on would be to add another powered speaker to use with the QRS PNO3WB processor.
1 PNO3 Quick Guide MIDI Upgrade Kit Conversion [Parts added to a QRS Upgrade Kit] 70166 Adapter: MIDI Barrel Connector 803081 PNO3WB Power Adapter 9V 2A 70152 Cable: 10’ MIDI [One MIDI cable came with the QRS upgrade kit….adding another here.]...
Page 3
Connect the MIDI OUT of the exis ng MIDI Interface to the MIDI IN on PNO3WB processor. There are NO special PNO3WB processor so ware se ngs to Record or trigger synth sounds via the PNO3’s Prac ce op on.
Page 4
MIDI record/playback purposes. Use a 50126 “USB A Male to USB Mini B” cable to connect PNO3WB’s USB HOST port to the USB Mini B port on the PLX box. Use to update PNO3WB’s “File System Version” so ware.
Page 5
#1 “Power” light turns green #2 “System” = green #3 “Network” = green [The Network light indicates the status of the Wired Network(LAN) PNO3WB’s Ethernet Port connec on.] Within two (2) minutes... Voice‐Prompts should be heard from the speaker and the “Prompts” light flashes yellow.
Page 6
PNO3WB MIDI Upgrade Kit Instruc ons ‐ 83529 Accessing and Naviga ng the PNO3WB Control Menu [Connect to the QRS Wi‐Fi] PNO3WB processors have built‐in Wi‐Fi and are shipped to operate as soon as the system powers on. Use your smart device [iPhone, iPad, iPod, Android phone/tablet or laptop] to wirelessly connec on to QRSPNO3_##### Wi‐Fi.
Page 7
Go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Op ons / 5 Pin Out. 5‐pin MIDI Out Delay (ms) Tap the “‐” and “+” bu ons to change the delay of the piano. QRS Music Technologies, Inc. / Technical Support ‐ 800‐247‐6557 / www.qrsmusic.com...
Page 8
Play Sample is used. Go to: System Setup / Performance Setup / Master Volume Curves Tap the QRS Solo File Setup [Songs with red tles] Volume Curve Configura on – So Playback page Set the PLAYBACK QRS (SOLO) PIANO CURVE = 0 Tap NEXT to Volume Curve Configura on –...
Wired Network (LAN) A hard‐wire connec on from the PNO3WB’s Ethernet port to the home router or one of it’s extenders. The home router will assign an IP address to the PNO3WB processor as soon as a viable connec on is made. ...
Page 10
Scroll down the page to find the Ac ve DRM sec on. Look for a DRM ID number indica ng...release songs for 1 year...with an expire date. Song Menu Overview Here is a simple overview of the QRS Music Song Menu. See your QRS PNO3 User Guide for more informa on.
Page 11
The ini al one‐year music trial period determines the QRS Player Parts Warranty period. Extended Parts Warranty QRS Player Parts are covered as long as the QRS PNO3 system is under a QRS Music Subscrip on Plan To determine the warranty period for your system: Go to: System Setup / Service / View Se ngs and scroll down the page to find the Ac ve DRM sec on.