Download Print this page

QRS PMII Upgrade Instructions page 6

Advertisement

MIDI Se ngs
[The piano won't play un l 5 Pin MIDI Out op on is turned ON.]
From Home, go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Op ons / General
MIDI Player System=ON
Controller 7 Volume Control = ON
Apply Volume Curve to Veloci es = ON
Per Channel Controller 7 Enable = Select #1
Number of MIDI Out Notes = 88
Lowest MIDI Out Note = 21
Go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Op ons / 5 Pin Out
5 Pin MIDI Out = ON
[The PNO3WB won't send data to the MIDI Out port unless this is ON.]
MIDI Out Key Adjust
Min. MIDI Out [Adjusts the MIDI Out volume level ]
Used to make minor "MIDI Volume" adjustments so the keys play, and play evenly.
This adjustment does NOT replace the actual key "calibra on" performed using the PianoDisc or Disklavier control box.
Go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Out Key Adjust.
MIDI Key Adjust
Global
Tap Start. The selected Note should begin to play.
Tap the
"‐ ‐
>" bu on in the
See how the notes play up the keyboard.
Tap
Stop
You
CAN increase
You would need to calibrate the keys using the PianoDisc or Disklavier controller.
To increase the MIDI level going out to the player:
Tap‐Use the "<‐" or "‐>" bu ons to go to the note that you want to adjust.
Min. MIDI
Out‐Use the "+" bu on to increase the level. The minimum se ng is 1.
The "‐‐>" bu on at the end of the row, sets the current value to all keys upscale, from the selected note. Changes are
automa cally saved.
Tap
Stop
when finished.
MIDI Out Pedal Adjust
Go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Out Pedal Adjust.
Pedal Test On Time: 500
Tap
Start
Pedal Max
Out‐Use the "<‐" or "‐>" bu ons to see if changes can be made to the to damper li .
Tap
Stop
Audio Accompaniment‐Speaker Test
Go to: Play Piano / Genre / Country & Western Accompaniment and Tap the song name,
MIDI OUT Delay
Use this adjustment to synchronize the piano with the audio.
Go to: System Setup / Performance Setup / Rou ng & Delay Se ngs / MIDI Op ons / 5 Pin Out.
5‐pin MIDI Out Delay (ms)
Tap the "‐" and "+" bu ons to change the delay of the piano.
6
QRS PMII to PNO3WB Upgrade Instruc ons
MIDI Se
‐ Red when ON ‐ Any changes made will affect ALL keys.
Note
row to play chroma cally up the keyboard.
the MIDI level of each note but, you
just sets the repeat rate of the ON/OFF pedal during the test. Set to 500.
ngs‐MIDI Controller
Do NOT use!
CAN'T decrease
the level to make it any so er.
Deed I
Do. The audio should be heard.

Advertisement

loading

This manual is also suitable for:

Pno3