Advertisement
Reconnect the piano to an AC outlet and turn ON the power supply switch.
The PLX lights begin to scan as the opera ng system is loaded.
Voice prompts, announcements, should be heard in about 90 seconds.
These PNO3WB bu on lights should illuminate. [1=OFF, 2=ON solid, 3=On blinking]
PlxMV light sequence:
Power/Standby/Play—Green=Ready, Yellow = Standby, Green‐flashing = Song is Playing.
System—Green=All Good, Yellow‐flashing=Hand‐held remote control command received.
[Wired Network [LAN] Green=Standalone & Yellow=Networked] Red=Not Networked, Red‐flashing=resolving IP address.
I/O Mode—Indicates the Source
MIDI OUT—Sending MIDI data.
Prompts/Audio—Yellow‐flashing=voice announcements and song audio being sent to audio outputs.
Within ninety (90) seconds
#1 "Power" light turns green
#2 "System" = green
#3 "Network" = green [The Network light indicates the status of the Wired Network(LAN) PNO3WB's Ethernet Port connec on.]
Within two (2) minutes...
Voice‐Prompts should be heard from the speaker and the "Prompts" light flashes yellow.
Accessing and Naviga ng the PNO3WB Control Menu [Connect to the QRS Wi‐Fi]
PNO3WB processors have built‐in Wi‐Fi and are shipped to operate as soon as the system powers on.
1
Use your smart device [iPhone, iPad, iPod, Android phone/tablet or laptop] to wirelessly connec on to QRSPNO3_##### Wi‐Fi.
2
Enter the password = qrsmusic.
3
Open your web browser; Apple Safari, Android Browser or Google Chrome.
Enter 10.3.2.1 in the address bar.
This QRS Splash Screen will appear.
Touch the center of the screen to open the QRS Menu.
You will see one of several possible screens.
Look for the menu column on the le , not in the body of the screen.
If only three white bars show at the top le of the QRS screen...
...the Menu column is closed.
Tap three bars to open the Menu column.
An image of a white house, with no white arrow, and you're at the
White arrow point toward the house, you're NOT at the home page.
Tap the white arrow to go back in the menu one page at a me.
Tap the white house to go directly to the home page.
The gear image takes you to the System Setup page.
The four arrows opens the window to Full Screen.
Tap the three bars to close the menu column.
QRS PMII to PNO3WB Upgrade Instruc ons
Power ON and Test the PNO3WB
Home
page.
You may have this later version
7
Advertisement
