Advertisement
QRS SYSTEM
Pedal Adjust
Go to: System Setup / Performance Setup / Pedal Adjust.
Pedal Test On Time:500
Make the changes below before beginning the adjustment.
Tap "‐" or input "0" in the fields and select Enter/Return on your keyboard.
Pedal Pre‐Play Time = 0
Pedal A ack = 2000
Pedal Hold = 0
Pedal Retro = 0
Get in a posi on where you can see the piano dampers and then, Tap the
Pedal A
ack: Tap "+" un l the dampers jump up off of the strings. Tap "+"
Pedal
Hold: Tap "+" un l the dampers stay up for a second before falling. Tap "+"
Pedal
Retro: Tap "+" or "‐" so that the dampers hold for about one second before falling.
Pedal Retro pulses the pedal solenoid as it falls. This adjustment is used to eliminate some of the mechanical noise.
Tap the
Stop
bu on when finished.
10
QRS PMII to PNO3WB Upgrade Instruc ons
[Not necessary if there isn't a pedal solenoid a ached and/or Magic Pedal is ON]
=
500
[Adjusts the pedal solenoid ON/OFF interval during the Pedal Adjust procedure.
Start
bu on.
two more
mes.
two more
mes.
Advertisement
