Advertisement
Playback Parameters
Do the correct keys play?
System Setup / Performance Setup /
Play the
Chroma c test
Play the
Middle C test
System Setup / Performance Setup /
[Tap the labels to display the default se ng.]
Legacy Driver Board Enabled
Notes Inverted
= ? Test Files‐Chroma c [To determines the direc on of play.]
Number of Notes
80 note system ‐ Number of notes
88 note system ‐ Number of Notes = 88
Lowest Note
Test Files‐Middle C [This se ng is a MIDI Reference and NOT the actual note/key number.]
Example: If C# played during the Middle C test, increasing the Lowest Note number by one will then trigger middle C.
80 note system ‐ Lowest Note = 25
88 note system ‐ Lowest Note = 21
Transpose
=
0
Note Delay (ms)
=
Is there a Pedal Solenoid a ached?
If the system does NOT have a Pedal Solenoid a ached then, turn on the Magic Pedal.
Magic Pedal
= ON If no pedal solenoid is a ached.
Key Adjust
System Setup / Performance Setup /
Set each note to play as SOFTLEY as possible!
Min. A ack
[Sets the level that a note will play when the Master Volume = 1 and Piano Volume = 0...when playing songs.]
Beware: Absolute Min Force and Master Volume Curve se ngs can OVERRIDE the Key Adjust se ngs.
Note‐Use the "<‐" or "‐>" bu ons to go to note 5, or 1 on an 88 note systems.
Force
Preset‐Set to
Regular Ac on
Retro Time
(ms)‐Set to
Retro
Divisor‐Set to
1/3 of Key Force
Press Start. Note 5, or 1 should begin to play.
1]
Min. A
ack‐Tap "‐" or "+" to adjust the note to play as so ly as possible.
2] Note‐Tap "‐>" to move to the next note.
Repeat steps 1 & 2 for each note.
Press
Stop
when all notes have been adjusted.
Global
‐ Red when ON ‐ Any changes made will affect ALL keys.
Use the "<‐‐" or "‐‐>" bu ons, in the
The four "‐‐>" bu ons, at the end of the bo om four rows, set the current value to all keys upscale, from the selected note.
8
QRS PMII to PNO3WB Upgrade Instruc ons
Ini al System Setup
[The path to menu items will always start at the Home page.]
Test
Files.
file. If the keys play from right to le then, flip the Notes Inverted switch...below.
file. If the middle C key does not play then change the number of notes...below.
Playback
Parameters.
=
ON
[Legacy boards are all boards other than the Smart Driver Boards] Scroll to bo om of page.
[Most QRS systems use only 80 key solenoids, the first and last four are NOT used.]
=
80
500
Key
Adjust.
and tap "‐‐>" at the right.
120
and tap "‐‐>" at right.
and tap "‐‐>" at the right.
Note
row, to play chroma cally up or down keyboard. Use to check the
QRS SYSTEM
‐
Do NOT use!
Min. A ack
se ngs.
Advertisement
