Advertisement
Unplug the piano from the AC outlet and locate the PMII Processor.
Locate the PMII Processor.
Look under the soundboard area on a grand piano.
Remove the Lower Panel on an upright.
Disconnect the cables and remove PMII processor from the piano.
USB HOST‐The USB HOST ports are the same so, the cables can be re‐inserted in either socket.
USB CLIENT
ETHERNET
AUDIO
1‐4‐Label the Audio cables before disconnec
MIDI IN‐This port may be connected to a MIDI Record strip.
KEYSCAN ALT
POWER SUPPLY
KEYSCAN PRIMARY ‐ If the PNOscan Record System is installed.
MIDI IN ‐ This port may be connected to a MIDI Record strip.
KEYSCAN PRIMARY ‐ If the PNOscan Record System is installed.
Driver Port‐Disconnect the driver board cable, one of these three types.
Port B: 20‐pin connector [Black ribbon cable‐black plas c connector]
Port B: 37‐pin connector [Gray ribbon cable‐metal connector w/blue plas c]
Port A: 20‐pin flat connector [Black ribbon cable‐no connector]
MIDI IN ‐ This port may be connected to a MIDI Record strip.
MIDI OUT ‐ This port connects to the MIDI slave device that the QRS processor is controlling.
9VDC Power Adapter
SD Card‐DO NOT remove, you won't need it.
The QRS Music Library is now stored INSIDE the PNO
Unscrew and remove the PMII processor from the piano.
Return the PMII processor
QRS PMII to PNO3WB Upgrade Instruc ons
Disconnect and Remove the PMII Processor
3
WB processor.
with the SD card
ng.
QRS System
MIDI Controller
to QRS Music using the UPS Return Label provided.
Lower Panel
3
Advertisement
