NordicTrack T 8.0 User Manual page 11

9. Insert the console wire through the hole in the
Console Base (101) and through the looped
plastic tie on the Console Base.
Insert the ground wires into the Console (98) as
you attach the Console to the Console Base
(101) with four #8 x 3/4" Screws (1); start all
four Screws, and then tighten each of them.
Be careful not to pinch any wires.
10. Set the console assembly face down on a soft
surface to avoid scratching the console assem-
bly.
Identify the Right Handrail (77). Hold the Right
Handrail near the console assembly. Tie the
wire tie in the Right Handrail securely around
the end of the console wire. Then, pull the other
end of the wire tie until the console wire is
routed through the hole and completely through
the Right Handrail.
Align the holes in the ends of the Handrail
Crossbars (74) with the bolt holes in the Right
Handrail (77).
9
Ground
Wires
Hole
Console
Wire
10
Bolt
74
Holes
Console
Assembly
11
98
101
1
Plastic
Tie
Hole
Wire
Tie
1
Console
Wire
77