Page 1
All manuals and user guides at all-guides.com Model No. NETL79711.0 USERʼS MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if there are missing parts, please contact us:...
All manuals and user guides at all-guides.com IMPORTANT PRECAUTIONS WARNING: To reduce the risk of serious injury, read all important precautions and in- structions in this manual and all warnings on your treadmill before using your treadmill. ICON as- sumes no responsibility for personal injury or property damage sustained by or through the use of this product.
Page 4
All manuals and user guides at all-guides.com 19. Never leave the treadmill unattended while it 23. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and press the power switch into the off position when the treadmill is not Always unplug the power in use.
All manuals and user guides at all-guides.com BEFORE YOU BEGIN Thank you for selecting the revolutionary ing this manual, please see the front cover of this man- NORDICTRACK T8.0 treadmill. The T8.0 treadmill of- ual. To help us assist you, please note the product ®...
All manuals and user guides at all-guides.com ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant.
Page 7
All manuals and user guides at all-guides.com 1. Make sure that the power cord is unplugged. Attach a Wheel (81) to the Base (80) with a 3/8" x 2 1/2" Bolt (2) and a 3/8" Nut (3). Do not over- tighten the Nut;...
Page 8
All manuals and user guides at all-guides.com 4. Hold the Left Upright (75) against the Base (80). Be careful not to pinch the wires. Insert a 3/8" x 4" Screw (4) with a 3/8" Star Washer (5) into the top hole in the Left Upright. Insert the 3/8"...
Page 9
All manuals and user guides at all-guides.com 6. Attach the Console Frame (87) to the Left and Right Uprights (75, 76) with two 5/16" x 3 1/4" Screws (7) and two 5/16" Star Washers (8); do not fully tighten the Screws yet. 7.
Page 10
All manuals and user guides at all-guides.com 8. Locate the tie in the console assembly. Use the tie to pull the ground wires out of the hole in the Console Assembly console assembly. With the help of a second person, hold the con- sole assembly near the Left Upright (75).
Page 11
All manuals and user guides at all-guides.com 10. Attach the Pulse Bar Bottom (90) to the console assembly with six #8 x 3/4" Screws (6); start all Console six Screws, and then tighten them. Do not Assembly overtighten the Screws. 11.
Page 12
All manuals and user guides at all-guides.com 12. Raise the Frame (49) to the position shown. Have a second person hold the Frame until step 13 is completed. Orient the Storage Latch (51) so that the large barrel and the latch knob are oriented as shown. Attach the lower end of the Storage Latch (51) to the Base (80) with a 3/8"...
All manuals and user guides at all-guides.com OPERATION AND ADJUSTMENT HOW TO PLUG IN THE POWER CORD Follow the steps below to plug in the power cord. This product must be earthed. If it should malfunc- 1. Plug the indicated end of the power cord into the tion or break down, earthing provides a path of least socket on the treadmill.
Page 14
All manuals and user guides at all-guides.com CONSOLE DIAGRAM FEATURES OF THE CONSOLE any time, go to www.iFit.com or call the telephone number on the front cover of this manual. The treadmill console offers an impressive array of features designed to make your workouts more effec- You can even listen to your favorite workout music or tive and enjoyable.
Page 15
All manuals and user guides at all-guides.com HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power.
Page 16
All manuals and user guides at all-guides.com 4. Change the incline of the treadmill as desired. Trail tab will show a track that represents 400 m (1/4 mile). As you exercise, the flashing rectangle To change the incline of the treadmill, press the will show your progress.
Page 17
All manuals and user guides at all-guides.com 6. Measure your heart rate if desired. 7. When you are finished exercising, remove the key from the console. Note: If you use the handgrip heart rate monitor and the optional chest heart rate monitor at the Step onto the foot rails, press the Stop button, and same time, the console will not display your adjust the incline of the treadmill to the lowest...
Page 18
All manuals and user guides at all-guides.com HOW TO USE AN ONBOARD WORKOUT ent speed and/or incline setting is programmed for the next segment, the treadmill will automatically 1. Insert the key into the console. adjust to the new speed and/or incline setting. See HOW TO TURN ON THE POWER on page 15.
Page 19
All manuals and user guides at all-guides.com HOW TO USE AN IFIT LIVE WORKOUT Press the iFit Live button to download the next workout in your schedule. Press the My Trainer Note: To use an iFit Live workout, you must have an button, the My Maps button, the World Tour button, optional iFit Live module.
Page 20
All manuals and user guides at all-guides.com 6. Follow your progress with the displays. Next, press the play button on your MP3 player, CD player, or other personal audio player. Adjust the vol- See step 5 on page 16. ume on your personal audio player or press the volume increase and decrease buttons on the console.
Page 21
All manuals and user guides at all-guides.com THE INFORMATION MODE 3. CONTRAST LVL: Press the Incline increase and decrease buttons to adjust the contrast level of the The console features an information mode that keeps display. track of treadmill information and allows you to person- If a module is connected, you may also select the alize console settings.
All manuals and user guides at all-guides.com HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill.
All manuals and user guides at all-guides.com TROUBLESHOOTING Most treadmill problems can be solved by following SYMPTOM: The console displays remain lit when the simple steps below. Find the symptom that you remove the key from the console applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual.
Page 24
All manuals and user guides at all-guides.com Lower the treadmill (see HOW TO LOWER THE maximum incline level and then return to the mini- TREADMILL FOR USE on page 22). Remove the mum level. This will calibrate the incline system. If three #8 x 3/4"...
Page 25
All manuals and user guides at all-guides.com SYMPTOM: The walking belt is off-center or slips b. If the walking belt slips when walked on, first re- when walked on move the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller screws a.
All manuals and user guides at all-guides.com EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
All manuals and user guides at all-guides.com PART LIST Model No. NETL79711.0 R0711A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Ground Screw Left Footrail Cap 3/8" x 2 1/2" Bolt Idler Roller 3/8" Nut Motor Hood 3/8"...
All manuals and user guides at all-guides.com ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...