Do you have a question about the T 8.0 and is the answer not in the manual?
Questions and answers
sal lema
February 21, 2025
The mph has changed to kilometers. How do I change it back.
1 comments:
Mr. Anderson
February 21, 2025
To change the speed display from kilometers to miles per hour on the NordicTrack T 8.0, you need to access the Information Mode. The manual refers to page 21 for instructions on selecting the unit of measurement.
Page 1
USERʼS MANUAL Model No. NTL08010.0 Serial No. Write the serial number in the space above for reference. Serial Number Decal QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CON- TACT THE STORE; please contact Customer Care.
16. To purchase a surge suppressor, see informed of all warnings and precautions. your local NordicTrack dealer or call the tele- phone number on the front cover of this man- 3. Use the treadmill only as described.
Page 4
20. Never leave the treadmill unattended while it 24. Inspect and properly tighten all parts of the is running. Always remove the key, unplug treadmill regularly. DANGER: the power cord, and press the power switch into the off position when the treadmill is not Always unplug the power in use.
® T 8.0 treadmill. The T 8.0 treadmill offers an impres- ual. To help us assist you, please note the product sive selection of features designed to make your work- model number and serial number before contacting us.
ASSEMBLY Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, some lubricant may be transferred to the top of the walking belt or the shipping carton.
Page 7
1. Make sure that the power cord is unplugged. Hole With the help of a second person, carefully tip the treadmill onto its left side. Partially fold the Frame (46) so that the treadmill is more stable; do not fully fold the Frame yet. Cut the shipping tie securing the Upright Wire (85) to the Base (92).
Page 8
3. Identify the Right Upright (82), which is marked with a “Right” sticker. Hold the Right Upright near the Base (92) as shown. See the inset drawing. Tie the wire tie in the Right Upright (82) securely around the end of Wire Tie the Upright Wire (85).
Page 9
5. With the help of a second person, carefully tip the treadmill onto its right side. Partially fold the Frame (46) so that the treadmill is more stable; do not fully fold the Frame yet. Attach a Wheel (91) to the Base (92) with a 3/8" x 2"...
Page 10
7. Identify the Left Base Cover (88) and the Right Base Cover (89). Slide the Left Base Cover onto the Left Upright (81). Slide the Right Base Cover onto the Right Upright (82). 8. Hold the Console (98) near the Console Base (101).
Page 11
9. Insert the console wire through the hole in the Console Base (101) and through the looped plastic tie on the Console Base. Ground Insert the ground wires into the Console (98) as Wires you attach the Console to the Console Base (101) with four #8 x 3/4"...
Page 12
11. Position the console wire under the Handrail Crossbar (74) as you set the Right Handrail (77) Console onto the console assembly. Be careful not to Wire pinch the console wire. Attach the Right Handrail (77) to the console as- sembly with a #8 x 3/4"...
Page 13
14. Set the console assembly on the Right Upright (82) and the Left Upright (not shown). Be care- Console Assembly ful not to pinch any wires. Plastic Tie Start four 5/16" x 1" Bolts (5), and four 5/16" Star Washers (12), and two 5/16" x 1 1/4" Bolts Console (4) into the Right Upright (82) and the Left Wire...
Page 14
16. Remove the thin sheet of plastic from the face of the Console (98). Carefully press the tabs on the Book Holder (107) into the slots in the Console until they snap into place. Slot 17. Raise the Frame (46) to the position shown. Have a second person hold the Frame until this step is completed.
HOW TO USE THE CHEST PULSE SENSOR HOW TO PUT ON THE CHEST PULSE SENSOR may remain activated longer than necessary, drain- ing the battery prematurely. The chest pulse sensor consists of two components: the chest strap and the sensor unit. Insert the tab on •...
OPERATION AND ADJUSTMENT THE PRE-LUBRICATED WALKING BELT that is properly installed and grounded in accor- dance with all local codes and ordinances. IMPORTANT: The treadmill is not compatible with Your treadmill features a walking belt coated with high- performance lubricant. IMPORTANT: Never apply sil- GFCI-equipped outlets.
Page 17
CONSOLE DIAGRAM FEATURES OF THE CONSOLE You can even listen to your favorite workout music or audio books with the consoleʼs stereo sound system The treadmill console offers an impressive array of while you exercise. features designed to make your workouts more effec- To turn on the power, see page 18.
Page 18
HOW TO TURN ON THE POWER HOW TO USE THE MANUAL MODE IMPORTANT: If the treadmill has been exposed to 1. Insert the key into the console. cold temperatures, allow it to warm to room tem- perature before turning on the power. If you do not See HOW TO TURN ON THE POWER at the left.
Page 19
4. Change the incline of the treadmill as desired. The Distance display—This display To change the incline of the treadmill, press the will show the distance Incline increase or decrease button or one of the that you have walked or numbered 1 Step Incline buttons.
Page 20
6. Measure your heart rate if desired. 7. Turn on the fan if desired. Note: If you use the handgrip pulse sensor and The fan features several Fan Decrease the chest pulse sensor at the same time, the speed settings. Press console will not display your heart rate accu- the Fan increase or de- rately.
Page 21
HOW TO USE AN ONBOARD WORKOUT a few seconds and the treadmill will automatically adjust to the new speed and/or incline setting. 1. Insert the key into the console. The workout will continue in this way until the last See HOW TO TURN ON THE POWER on page 18. segment of the profile flashes in the display and the last segment ends.
Page 22
HOW TO USE AN IFIT LIVE WORKOUT If there are no workouts of the selected type in your queue, the next workout in your queue will be Note: To use an iFit Live workout, you must have an downloaded. optional iFit Live module. To purchase an iFit Live module at any time, go to www.iFit.com or call the When you select an iFit Live workout, the displays telephone number on the front cover of this man-...
Page 23
THE INFORMATION MODE Press the decrease button next to the Enter button to view the next display. The display will show the con- The console features an information mode that keeps trast level of the displays. Press the Incline increase track of treadmill information and allows you to person- and decrease buttons to adjust the contrast.
Page 24
HOW TO USE THE STEREO SOUND SYSTEM Next, press the Play button Volume Decrease on your MP3 player, CD To play music or audio books through the consoleʼs player, or other personal stereo speakers, you must connect your MP3 player, audio player.
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to the lowest position before you fold the treadmill. left.
TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a.
Page 27
Remove the three #8 x 3/4" Screws (1) and care- fully pivot the Motor Hood (54) off. Locate the Reed Switch (104) and the Magnet (108) on the left side of the Pulley (103). Turn the Pulley until the Magnet is aligned with the Reed Switch.
Page 28
PROBLEM: The walking belt is off-center or slips when walked on SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller bolt clockwise 1/2 of a turn;...
EXERCISE GUIDELINES WARNING: Burning Fat—To burn fat effectively, you must exer- cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
PART LIST Model No. NTL08010.0 R1110C To locate the parts listed below, see the EXPLODED DRAWING near the end of this manual. Key No. Qty. Description Key No. Qty. Description #8 x 3/4" Screw Left Rear Foot #8 x 1" Tek Screw Hex Key 1/4"...
Page 31
Key No. Qty. Description Key No. Qty. Description Console Base Chest Pulse Sensor Pulse Crossbar Book Holder Drive Roller/Pulley Magnet Reed Switch – Userʼs Manual Chest Pulse Strap Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to pro- vide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...
Need help?
Do you have a question about the T 8.0 and is the answer not in the manual?
Questions and answers
The mph has changed to kilometers. How do I change it back.
To change the speed display from kilometers to miles per hour on the NordicTrack T 8.0, you need to access the Information Mode. The manual refers to page 21 for instructions on selecting the unit of measurement.
This answer is automatically generated