Page 1
Maintenance instructions Combi Steamer Unit Model Type of Unit type energy FlexFusion 6.15 Electric Tabletop unit Platnium 6.21 Pedestal unit FlexFusion 10.15 Gold 10.21 20.15 20.21 10013865-0AWAE— en-US R E G I S T E R W A R R A N T Y O N L I N E AT W W W. H E N N Y P E N N Y. C O M...
Directory of contents 1 Introduction ................. 5 1.1 About this manual ................ 5 1.2 General information ................. 5 1.3 Maintenance interval ................ 5 2 Safety instructions ............. 6 3 Maintenance schedule ............ 7 3.1 Company performing the work ............ 7 3.2 Customer data .................. 7 3.3 Unit data .................... 7 3.4 Water connection ...
Page 4
Directory of contents Maintenance instructions...
Introduction 1 Introduction 1.1 About this manual This manual contains information that the service technicians need for the professional maintenance of the unit. The service technician must also heed the contents of the service instructions, installation instructions, and operating instructions. Target group The target group for this manual is trained qualified personnel entrusted with the technical functioning and operation of the unit.
Safety instructions 2 Safety instructions For servicing tasks, the service technician must be familiar with and observe regional regulations. In addition, the notes in the service manual must be observed. Risk of personal injury and property damage from electric shock DANGER •...
Maintenance schedule 3 Maintenance schedule 3.1 Company performing the work Service company performing the work Service company performing the work: ________________________________________________ Service technician performing the work: ____________________________________________ Street, no.: ___________________________________ Postal code, city:_______________________________________ Telephone: _______________________________________________ 3.2 Customer data Customer data Commission: ________________________________________________ Contact person: ____________________________________________ Street, no.: ___________________________________...
Maintenance schedule 3.5 Chassis and cooking chamber Step Description Is the unit levelled? Check door seal for damage and to ensure it does not leak. If necessary, replace door seal and adjust cooking chamber door. Only for 20.x pedestal units: check profile seal on the cooking chamber door for damage and to ensure that it does not leak.
Maintenance schedule 3.6 Component check Step Description Cooking chamber light Cooling fan (the number of cooling fans varies depending on the unit variant) Air inlet flap / solenoid DynaSteam² Magnetic valve water vapor elimination WaveClean drain pump WaveClean circulation pump Check cooking chamber motor for noise development (bearing damage).
Maintenance schedule 3.8 Expected maintenance on gas units Step Description Does the information on the gas type supplemental label match the gas type available? Gas type present Natural gas: Liquefied gas (LPG): E/H, G20, 20 mbar B/P, G30/G31, 50 mbar LL/L, G25, 20 mbar B/P, G30/G31, 30 mbar L, G25, 25 mbar...
Information about the maintenance schedule 4 Information about the maintenance schedule 4.1 Water connection Step Description Check remaining capacity of water filter. If necessary, perform maintenance. The capacity of the water filter can be stored on the Service menu. When the capacity set has been reached, a note appears.
Information about the maintenance schedule Step Description Start unit in the steaming cooking mode. Check unit from the left and right side for leaks. 4.4 Software Locate installed software version using the unit information on the service menu. If necessary, perform the software up- date using the service menu.
Need help?
Do you have a question about the 6.15 and is the answer not in the manual?
Questions and answers