Soldering Ic Socket; Inserting Cable Head - Renesas H8/3694 User Manual

2.2.2

Soldering IC Socket

After fastening, solder the IC socket for a TNP-48 package to the user system.
Be sure to completely solder the leads so that the solder
slops gently over the leads and forms solder fillets. (Use
slightly more solder than the MCU.)
2.2.3

Inserting Cable Head

Check the location of pin 1 before inserting.
Align pin 1 on the IC socket for a TNP-48 package on the user system with pin 1 on the user
system interface cable head, and insert the user system interface cable head into the IC socket on
the user system, as shown in figure 4.
CAUTION
CAUTION
7