Leica TC605 User Manual page 96

FORMAT
96
The Leica GSI-format can be output as a 8 or 16 digit
string. However, this format setting is only relevant for
the serial output of data and has no effect on the entries
into the instrument. This setting is only responsible for
the output string size. As an example, if a 12-digit point
number in the 8-character-mode is output only the last 8
digits are transfered. Internally, however, always 16-
digit strings are used, in order to guarantee a later
output in another data format.
Using an entry of a 12-digit point number or station
designation as an example the format generated by the
instrument is described below:
(The 12-digit entry is always possible in both cases).
Pt.No. input: 123456789012
Setting 8 characters (FORMAT 8) :
Display indication: 56789012
Output string:
Setting 16 characters (FORMAT 16) :
Display indication: 123456789012
Output string:
Int. stored.
RS232 Two data templates ( = RECMASKS ) are available for
external recording:
MASK1
MASK2
Coordinate points are always stored in the format PtNr,
E, N, H.
The settings of MASK1 and MASK2 have no affect to
the data stored internally.
TC605/TC805/TC905/L-1.1.1en
110009+56789012 (Leica GSI
format)
*110001+0000123456789012
(Leica GSI-Format)
123456789012
Pt Nr, Hz, V, slope distance, ppm/mm,
hr, hi
Pt Nr, Hz, V, slope distance, E, N, H, hr
© Leica