Leica TC605 User Manual page 63

© Leica
∧ PROG
6.Calc Area
7.Rapid Meas
à
8.Ref. Line
∨ REF. LINE
•Pt :
E0 : 0.000
N0 : 0.000
H0 : 0.000
hi : 0.000
The present station coordinates are displayed for
inspection, but cannot be changed here.
∨ REF. LINE
Get DATA> IntMem
à
Pt : REF1
Define the first point for the reference line.
The point can be either:
- measured directly in the field (Get DATA>ONLINE)
- entered manually (Get DATA>Keyb.)
- retrieved from memory (Get DATA>IntMem).
Confirming the input.
Point "REF1" was first defined in the DATA MANA-
GER. This point is on a boundary line and defines the
start of a reference line.
Selection: stored point number (IntMem),
manual input (Keyb.) or
measured coordinates (Online).
Input of point number.
Confirming the input of the first point for the reference
line.
TC605/TC805/TC905/L-1.1.1en
à
à
à
1
1
63