Leica TC605 User Manual page 48

48
The shortest measured distance must be less than the
calculated distance between the 2 target points,
otherwise the error message "Bad Configuration"
appears and the program terminates.
The computed standard deviation for the position (mp)
refers to the accuracy of orientation (mo) used for the
shortest measured distance.
Valid for both procedures:
The orientation is calculated by the arithmetic mean of
all point orientations.
The calculation of the station height uses only those
points with a measured distance and heights not equal
zero.
The station height is the mean of the single heights.
The standard deviations for the orientation (mo) and the
station height (mp) are computed using residuals
derived from the arithmetic mean.
∨ FREE STATION
à
Pt :
hi : 1.200
Input of station number and instrument height (for
alphanumeric point entry see chapter "Settings" /
"Entering point number and reflector height").
Confirm input.
FREE STATION
2 Faces >
Selection: Yes: 2 Faces
No: 1 Face
Confirming the selection.
TC605/TC805/TC905/L-1.1.1en
44
YES
© Leica