Leica TC605 User Manual page 53

© Leica
Pt :
∆HZ :
82°15'30
∆
: ----
∆
: ----
The instrument is now ready for the first setout.
The desired setout point must be entered:
∨
SETOUT
Get DATA> IntMem
à
Pt :
hr : 1.500
Off: 0.300
Input of point number, reflector height and height offset
Off. The amount of Off is added to or subtracted from
the height to be set out, in accordance with its sign. This
takes account of infill, etc ....
The entered point number is local within the application
"Setout" and does not overwrite the system point
number.
The options exist to search for coordinates in the
COORD and MEAS data range (IntMem), for manual
entries after switching to Keyb or for manual entries of
angle and horizontal distance (Angle). It is possible to
use "Wildcards" (refer to section "Data management" /
"Searching for point numbers and multiple
recordings").
Pt :
∆HZ :
-0°05'30
∆
: 1.015
∆
: 0.025
Turn instrument until ∆ ∆ ∆ ∆ ∆ Hz = 0°00'00" (0.0000gon).
Repeat the measurements of the distance with
the displayed difference in distance (∆
required accuracy, i.e., close enough to "zero".
Records the measured data in the Meas data range.
The next point is selected.
TC605/TC805/TC905/L-1.1.1en
0
105
105
until
) is within the
53