Set The Oven Stop Command (Stopoven); Set The Temperature Command (Tempoven) - Scanivalve MPS4232 Hardware And Software Manual

MPS4232

Set the Oven Stop Command (STOPOVEN)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE

Set the Temperature Command (TEMPOVEN)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE
STOPOVEN
Set/Get
Sets the command to stop the oven / thermal chamber.
SET STOPOVEN [<stop oven command>]
If no command is entered, a CR is sent to the oven.
Prompt when ready to accept a new command.
SET STOPOVEN STOP
>
0
These values are not range checked.
TEMPOVEN
Set/Get
Sets the command to send the oven / thermal chamber to a temperature.
SET TEMPOVEN [<set temperature command>]
If no command is entered, a CR is sent to the oven.
Prompt when ready to accept a new command.
SET TEMPOVEN SETP1,
>
0
These values are not range checked.
67
Section 5: Software