Ip Variables; List Ip Settings (List Ip); Set Ip Address Of The Mps (Ipadd); Set Subnet Of The Mps (Subnet) - Scanivalve MPS4232 Hardware And Software Manual

Section 5: Software

IP Variables

The IP settings control the IP address and associated network identification settings of the MPS4200. The IP configuration is
accessed by the command LIST IP. These settings can only be saved using the SAVE IP command.

List IP Settings (LIST IP)

TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE

Set IP Address of the MPS (IPADD)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE

Set Subnet of the MPS (SUBNET)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
RANGE

Set Physical Ethernet Address (MAC)

COMMAND
TYPE
DESCRIPTION
Get
Returns all of the IP settings.
LIST IP
All of the IP setting followed by the prompt.
LIST IP
SET IPADD 10.0.1.222
SET SUBNET 255.255.0.0
SET MAC 0.96.93.90.0.100
SET GW 0.0.0.0
>
IPADD
Set/Get
Sets or retrieves the IP address of the MPS.
IPADD <ipadd>
Where <ipadd> is any valid IP address in the form nnn.nnn.nnn.nnn
Prompt when ready to accept a new command
SET IPADD 10.0.1.222
>
191.30.95.100
Any valid IP address
SUBNET
Set/Get
Sets the subnet mask.
SET SUBNET <mask>
Where <mask> is in the form nnn.nnn.nnn.nnn
Prompt when ready to accept a new command
SET SUBNET 255.255.0.0
>
255.255.255.0
Any valid subnet mask
MAC
Set/Get
Sets the hardware's MAC address.
46
MPS4232