Ftp Variables (List Ftp); List Ftp Settings (List Ftp); Set User Name (Userftp); Set Ftp Password (Passftp) - Scanivalve MPS4232 Hardware And Software Manual

Section 5: Software

FTP Variables (LIST FTP)

The FTP settings are used to control the MPS4200 FTP client connection to the FTP server, which is enabled by the ENFTP
variable under LIST S.

LIST FTP Settings (LIST FTP)

DESCRIPTION
SYNTAX
RETURNS
EXAMPLE

Set User Name (USERFTP)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT

Set FTP Password (PASSFTP)

COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
EXAMPLE
DEFAULT
Set FTP Path (PATHFTP)
COMMAND
TYPE
DESCRIPTION
SYNTAX
RETURNS
Returns all of the FTP settings
LIST FTP
All of the FTP setting followed by the prompt.
LIST FTP
SET USERFTP Scanivalve
SET PASSFTP password
SET PATHFTP /File
SET IPFTP 10.0.1.222
SET FILEFTP Scan
>
USERFTP
Set/Get
Sets the name of the user login on the FTP server or NAS
SET USERFTP <user name>
Prompt when ready to accept a new command
SET USERFTP Scanivalve
>
admin
PASSFTP
Set/Get
Sets the name of the user password for login on the FTP server or NAS
SET PASSFTP <password>
Prompt when ready to accept a new command
SET PASSFTP password
>
password
PATHFTP
Set/Get
Set the directory path of the scan data file on the user's computer. The argument does not require
the use of a drive letter e.g., C: or D:.
SET PATHFTP <directory path>
The <directory path> must start with a "/".
Prompt when ready to accept a new command
56
MPS4232